Fer Strumenti model H705 Part Number K4846700 in Texas

Description: Converter

Technical specification: Microprocessor based field trasmitter for conversion of signals from high temperature zirconia based oxygen probe. High britness 3½ led display for continuous oxygen reading. Possibility to call to the display the temperature of the probe and the heater of the cell to check electrodes status and display all other set-up parameters values, protected by changeable password. Measuring range: 0-25% O2 (volume). Output: 4-20 mA or 0-10 V (selectable), linear to oxygen percentage on the ranges 0÷25%, 0÷10%, 0÷5% and 0- 2000 ppm O2 (selectable). Serial output RS232 and RS485 Mod Bus protocol High and low O2 alarm contacts. Status and calibration contacts. Software dumper of output that can be regulated within 0 and 900 seconds. The converter includes one membrane pump, one flowmeter for referance , one flowmeter for calibration to send to the probe referance air and calibration air/gas. Housing: metal IP 65. Dimensions: mm 300x400x150. Power 230 V or 110 V 50-60 Hz

Condition: New (Unused)