+1 973 536 2331

sales@impexron.bg

Ari Armaturen GASKET POS. 7 FOR SAFETY VALVE Ari A. Fig. 901-912, DN 25/40 PN40 in BULGARIA

Get the best sales prices in BULGARIA for Ari Armaturen GASKET POS. 7 FOR SAFETY VALVE Ari A. Fig. 901-912, DN 25/40 PN40 from Impexron Ltd.

Product: GASKET POS. 7 FOR SAFETY VALVE Ari A. Fig. 901-912, DN 25/40 PN40

Brand: Ari Armaturen

Country: Bulgaria

Condition: New (Unused)

Impexron Ltd. is here to help you with procurement of GASKET POS. 7 FOR SAFETY VALVE Ari A. Fig. 901-912, DN 25/40 PN40 and other products and spare parts of Ari Armaturen.

Contact us to get an assistance from an expert for sales prices for Ari Armaturen - GASKET POS. 7 FOR SAFETY VALVE Ari A. Fig. 901-912, DN 25/40 PN40 in Bulgaria.

Using the products of Ari Armaturen will minimize your costs on spare parts.

Using our professional services will help you be more competitive on the market and it will save you time.

We are not a distributor of Ari Armaturen but we can sell their products to you on good prices.

We are selling Ari Armaturen - GASKET POS. 7 FOR SAFETY VALVE Ari A. Fig. 901-912, DN 25/40 PN40 in Bulgaria at competitive prices!

With each day we gain more and more experience and that's why we are able to satisfy your needs for spare parts.

Get an offer by sending us an inquiry via e-mail or through our online request form.

Our company is not an authorized distributor or representative for this brand. We are a reseller company for this brand.

Other products from Ari Armaturen

0277000032 module for position

0466000325 Potentiometer Megatron kpl. Gleitst. 1000Ohm einf

0466000403 Anbausatz Wegschalter PREMIO Standard Bauteil beinhaltet die Wegschalterplatine sowie jeweils die 3 Schrauben

911100028G191 ARI-PREMIO 2,2kN (Elektrischer Schubantrieb ARI-PREMIO Elektrischer Schubantrieb ARI-PREMIO 2,2kN BLDC 2,2kN gemäß Datenblatt PREMIO Spannung : 24V AC/DC Stellgeschwindigkeit : 0.38mm/sec Stellzeit : 79s Spindelüberstand : 83mm Kupplung : Gewinde M12 Ventilhub : Hub 30mm Anschlußplatine : PREMIO BLDC kpl. Schaltschlitten : ja)

ARI -SAFE cylinder safety valve DN50 / 80, PN 4 bar

ARI -SAFE DN 65/100 safety valve DN65 / 100, PN 6 bar

ARI -SAFE DN40/65 safety valve DN40/ 65, PN 6 bar

ARI -SAFE ELECTRONIC CONTROLLER Original Spare Part

ARI-PACO 0,85Y Electric actuator

ELEKTRISCHER HLK-SCHUBANTRIEB ARI-PACO 0,85KN Electric actuator

FIGUR 22.450 DN 150 (ARI-STEVI 450/423,Stellventil in Dreiwegeform mit Flanschen, JS1049 DN150,Nenndruck : PN 16 Flanschbohrung : nach DIN PN16 Funktion des Ventils : Mischfunktion Kvs-Wert : 320 Kennlinie : linear Spindelabdichtung : Dachmanschetten/PTFE-Graphit Antrieb : DP34 Wirkw.(b.pneum.Antr) : Feder schließt Anschluß "B" Federberei.(bar)/Hub(mm) : 0.80-2.40 Hub 50mm erford. Stelldruck (bar) : 3.2 bar max. zul. Stelldruck (bar) : 6 max. Schließdruck (bar) : 3.2 Stellungsregler : EPS 13 Eingangssignal : 4 - 20mA 2-Leiter Eingestellt : 4 mA Sitz B geschlossen Eing. m. Zuluft (bar) : 6 bar

FIGUR 23.003 / DN 50 / ARI-CHECKO-V (Rückschlagventil in Durchgangsform mit Flanschen Kegel:Loser Kegel mit Feder JS1049 DN 50 PN25)

FIGUR 23.470 / DN 50 / ARI-STEVI 470/422 (Stellventil in Durchgangsform mit Flanschen und schaftgeführtem Kegel JS1049 DN 50)

FIGURE 901/902,WERKSTOFFE EXHAUST GAS BOILER SAFETY VALVE ,MATERIAL WIRE TYPE C OVER ALL LENGTH = 1100 MM OUTE DIA OF SPRING=40 MM SPRING COIL DIA = 6 MM

REPAIR KIT FOR DN 50 flanged steam fence brand ARMATUREN DN 50. repair kit

SELF TAPPING SCREW FOR ARI-PREMIO 5.0 KN S/N 444990 Original Spare Part

Gasket-Item 7 for safety valve ARI ARMATUREN type ARI-SAFE-P fig 921 EN ISO 4126-1 gasket for valve

Spindle-item 14 for safety valve ARI ARMATUREN type ARI-SAFE-P fig 921 EN ISO 4126-1 spindle

Sealing ring-item 27 for safety valve ARI ARMATUREN type ARI-SAFE-P fig 921 EN ISO 4126-1 sealing ring

Impexron Ltd.

bul. "6-ti septemvri" 254, 4006 Plovdiv, Bulgaria

Phone:
+359 32 571 212

Fax:
+359 32 321 418

E-mail:
sales@impexron.bg

| |