If you need 40.RP Series to recover your broken equipment or machines or for new applications, you are on the right website.
Contact us to get an assistance from an expert for sales prices for Enerfluid - 40.RP Series Hydraulic Speed Regulators in Bulgaria.
By buying products of Enerfluid and using our service you get high quality products with cheap prices.
Get the best spare parts prices from a single source, don't waste time seeking for different suppliers when you can just go with one.
Our company is not a representative of Enerfluid, but we are selling their products at good prices.
Source the best sales prices for Enerfluid - 40.RP Series Hydraulic Speed Regulators in Bulgaria.
During the past years we managed to develop enough to satisfy the requirements of our customers.
You may send us an inquiry by e-mail or by using our online contact form.
[brand] [product] [description] [specification] [country] [offices]
DESCRIPTION
Tie rod construction with in-line or in-parallel compensation tank.
The speed regulator is basically a closed hydraulic circuit without its own power source. It consists of a cylinder filled with oil, a piston rod
and piston, a control valve and a compensation tank. When the regulator rod couples with an external moving organ, the piston rod moves to
close the one-way valve inside, which forces the oil through the transfer pipe towards the control valve, where it encounters a restriction that
can be adjusted externally to determine the speed. The oil flows through the control valve into the other chamber which is separated by the piston. During return
movement, the one-way valve opens and the oil flows freely to enable a rapid return movement. The in-line or in-parallel tank compensates the rod movement
and minimum blow-by. The dip-stick in the tank can be used to determine the oil level. These speed regulators can be fitted with control valves as follows
acceleration valves (SKIP), stop valves (STOP), acceleration + stop valve combinations (SKIP + STOP). These valves are normally opened and controlled by
air. Modified in this way, speed regulators can stop and/or accelerate the speed set by an externally adjustable hand-wheel.
APPLICATION
The hydraulic speed regulator is normally coupled with a pneumatic cylinder to get a constant speed.
SPEED
The speed can be regulated
Temperature variations alter the viscosity of the oil hence slightly affect the speed
CONSTRUCTIVE CHARACTERISTICS
- Bore 35 mm and 40 mm diameter
- Heads Oxidized aluminium
- Piston Rod C45 chromium plated steel
- Chamber Drowned and polished steel
- Tie rods Galvanized steel
TECHNICAL CHARACTERISTICS
- Maximum adjustable force
Series 35 without valves: 400 kgf.
with valves: 300 kgf. (including any inertia developed by moving mosses)
Series 40 without valves: 600 kgf.
with valves: 500 kgf. (including any inertia developed by moving mosses)
40.RPD.050.NO
40.RPD.100.NO
40.RPD.150.NO
40.RPD.200.NO
40.RPD.250.NO
40.RPD.300.NO
40.RPD.350.NO
40.RPD.400.NO
40.RPD.050.SS
40.RPD.100.SS
40.RPD.150.SS
40.RPD.200.SS
40.RPD.250.SS
40.RPD.300.SS
40.RPD.350.SS
40.RPD.400.SS
40.RPD.050.SE
40.RPD.100.SE
40.RPD.150.SE
40.RPD.200.SE
40.RPD.250.SE
40.RPD.300.SE
40.RPD.350.SE
40.RPD.400.SE
40.RPD.050.SU
40.RPD.100.SU
40.RPD.150.SU
40.RPD.200.SU
40.RPD.250.SU
40.RPD.300.SU
40.RPD.350.SU
40.RPD.400.SU
40.RPD.050.AA
40.RPD.100.AA
40.RPD.150.AA
40.RPD.200.AA
40.RPD.250.AA
40.RPD.300.AA
40.RPD.350.AA
40.RPD.400.AA
40.RPD.050.AE
40.RPD.100.AE
40.RPD.150.AE
40.RPD.200.AE
40.RPD.250.AE
40.RPD.300.AE
40.RPD.350.AE
40.RPD.400.AE
40.RPD.050.AU
40.RPD.100.AU
40.RPD.150.AU
40.RPD.200.AU
40.RPD.250.AU
40.RPD.300.AU
40.RPD.350.AU
40.RPD.400.AU
40.RPD.050.SEAU
40.RPD.100.SEAU
40.RPD.150.SEAU
40.RPD.200.SEAU
40.RPD.250.SEAU
40.RPD.300.SEAU
40.RPD.350.SEAU
40.RPD.400.SEAU
40.RPD.050.SUAE
40.RPD.100.SUAE
40.RPD.150.SUAE
40.RPD.200.SUAE
40.RPD.250.SUAE
40.RPD.300.SUAE
40.RPD.350.SUAE
40.RPD.400.SUAE
40.RPD.050.ASAS
40.RPD.100.ASAS
40.RPD.150.ASAS
40.RPD.200.ASAS
40.RPD.250.ASAS
40.RPD.300.ASAS
40.RPD.350.ASAS
40.RPD.400.ASAS
40.RPE.050.NO
40.RPU.050.NO
40.RPE.100.NO
40.RPU.100.NO
40.RPE.150.NO
40.RPU.150.NO
40.RPE.200.NO
40.RPU.200.NO
40.RPE.250.NO
40.RPU.250.NO
40.RPE.300.NO
40.RPU.300.NO
40.RPE.350.NO
40.RPU.350.NO
40.RPE.400.NO
40.RPU.400.NO
40.RPE.050.VA
40.RPU.050.VA
40.RPE.100.VA
40.RPU.100.VA
40.RPE.150.VA
40.RPU.150.VA
40.RPE.200.VA
40.RPU.200.VA
40.RPE.250.VA
40.RPU.250.VA
40.RPE.300.VA
40.RPU.300.VA
40.RPE.350.VA
40.RPU.350.VA
40.RPE.400.VA
40.RPU.400.VA
40.RPE.050.AS
40.RPU.050.AS
40.RPE.100.AS
40.RPU.100.AS
40.RPE.150.AS
40.RPU.150.AS
40.RPE.200.AS
40.RPU.200.AS
40.RPE.250.AS
40.RPU.250.AS
40.RPE.300.AS
40.RPU.300.AS
40.RPE.350.AS
40.RPU.350.AS
40.RPE.400.AS
40.RPU.400.AS
40.RPE.050.VS
40.RPU.050.VS
40.RPE.100.VS
40.RPU.100.VS
40.RPE.150.VS
40.RPU.150.VS
40.RPE.200.VS
40.RPU.200.VS
40.RPE.250.VS
40.RPU.250.VS
40.RPE.300.VS
40.RPU.300.VS
40.RPE.350.VS
40.RPU.350.VS
40.RPE.400.VS
40.RPU.400.VS
40.RPE.050.SP
40.RPU.050.SP
40.RPE.100.SP
40.RPU.100.SP
40.RPE.150.SP
40.RPU.150.SP
40.RPE.200.SP
40.RPU.200.SP
40.RPE.250.SP
40.RPU.250.SP
40.RPE.300.SP
40.RPU.300.SP
40.RPE.350.SP
40.RPU.350.SP
40.RPE.400.SP
40.RPU.400.SP
40.RPE.050.AEAS
40.RPU.050.AEAS
40.RPE.100.AEAS
40.RPU.100.AEAS
40.RPE.150.AEAS
40.RPU.150.AEAS
40.RPE.200.AEAS
40.RPU.200.AEAS
40.RPE.250.AEAS
40.RPU.250.AEAS
40.RPE.300.AEAS
40.RPU.300.AEAS
40.RPE.350.AEAS
40.RPU.350.AEAS
40.RPE.400.AEAS
40.RPU.400.AEAS
40.RPE.050.ASAU
40.RPU.050.ASAU
40.RPE.100.ASAU
40.RPU.100.ASAU
40.RPE.150.ASAU
40.RPU.150.ASAU
40.RPE.200.ASAU
40.RPU.200.ASAU
40.RPE.250.ASAU
40.RPU.250.ASAU
40.RPE.300.ASAU
40.RPU.300.ASAU
40.RPE.350.ASAU
40.RPU.350.ASAU
40.RPE.400.ASAU
40.RPU.400.ASAU
40.RPE.050.2A2R4
40.RPU.050.2A2R4
40.RPE.100.2A2R4
40.RPU.100.2A2R4
40.RPE.150.2A2R4
40.RPU.150.2A2R4
40.RPE.200.2A2R4
40.RPU.200.2A2R4
40.RPE.250.2A2R4
40.RPU.250.2A2R4
40.RPE.300.2A2R4
40.RPU.300.2A2R4
40.RPE.350.2A2R4
40.RPU.350.2A2R4
40.RPE.400.2A2R4
40.RPU.400.2A2R4
Impexron Ltd.
bul. "6-ti septemvri" 254, 4006 Plovdiv, Bulgaria
Phone:
+359 32 571 212
Fax:
+359 32 321 418
E-mail:
sales@impexron.bg