Pneumatics is changing air that is wherever and infinitely available in the world to power energy. You might seldom see its actual applications, but currently pneumatic equipment is used in production and conveyer lines in almost all industries.
Koganei Corporation is a leading company to serve your factory automation and labor saving requirements with our pneumatic and electronic product range. Productiviy improvements and cost efficiencies are company’ s pursuing targets, and they are vital for your competencies. By using pneumatics features which are cleanliness, low cost, and functionality enabling delicate human finger-like movement, we provide solutions required in a wide range of industries. We have also been developing environmentally friendly products used in water purification equipment etc.
We have used pneumatics from of old, but basic theory was established in the 17th century by famous Pascal. In the 19th century, air drills were developed for cutting coals in UK, and it went the first practical use of pneumatics. At the commencement of the 20th century, air brake was employed in trains in Japan. From 1950′ s, pneumatics has been used in the automation field of machine equipment, and pneumatic applications have been achieving quantum leap in step with industries’ development and expansion.
Solenoid valve iB-ZERO(5-ports)
● corresponding to cylinder diameter of 80mm[3.150in]. 5 port manifold solenoid valve , the adoption of the world’s first all- resin integrally molded body . Easy assembly of the manifold . Thin and lightweight type . Outstanding cost performance . For Pdf please click iB-ZERO
iB-Move
● Simple operation: Simple operation between two points. Easy stroke, speed, acceleration/deceleration, thrust level settings. Open loop control for lower cost. No linear motor and low-speed mechanism for extremely quiet operation. For Pdf please click iB-Move
iB-Flow
● A new form of flow volume control. Enables small bore cylinder speed control and low-speed range control. Precision digital control of micro flow volume from a remote location. Good for such applications as air-operated valve open/close speed control. For Pdf please click iB-Flow
iB-Cyclone (Rc thread , Cycline type wetar separator)
● (Rc thread) High-speed cyclone system (patent pending): Refined centrifuge know-how. Half the volume ratio of equivalent equipment, with a moisture separation rate of at least 99%. (Koganei measurement standards) No element makes it maintenance free.
iB-Cyclone (NPT thread , Cycline type wetar separator)
● (NPT thread) High-speed cyclone system (patent pending): Refined centrifuge know-how. Half the volume ratio of equivalent equipment, with a moisture separation rate of at least 99%. (Koganei measurement standards) No element makes it maintenance free.
Standard type
● Single-rod and double rod type cylinders with high general applicability. A wide-ranging series that allows selection to suit just about any installation space and mounting method.
With guides
● Cylinder with shaft guide and linear guide. Compact and highly rigid, and a greater degree of mechanical design freedom.
Transport type
● Perfect for transport processes. Slit type, Magnetic type and types with Linear guide to meet the needs of a variety of processes.
Air hands
● Perfect for workpiece chucking and handling. Combination with cylinders allows easy robot arm design. Various types of air drive type hands and mechanical drive type hands are available.
Handling products for robots
● Modularized products for use in robot handling. Different combinations produces a variety of movements.
Rotary actuators
● Rotary actuators that are perfect for workpiece rotation and inversion processes. Vane type, rack-and-pinion type, or integrated bearing can be selected to match specific designs.
High-speed Valpack cylinders
● High-speed cylinder with integrated solenoid valve. 100 Hz maximum operating frequency. Perfect for removal of heavy defective products, etc.
Low speed cylinders
● An original structure reduces stick-slip for outstanding low speed performance stability. Low-speed cylinder series with external dimensions of each cylinder the same as standard products for easier handling.
Cylinder joint
● Simplifies cylinder axis and workpiece axis alignment, and parallelism alignment, which greatly reduces mounting time.
Sensor switch
● Various solid state and contact sensors, stroke sensors, and linear magnetic sensors that can be equipped on Koganei cylinders.
Solenoid valve internal pilot
● Internal pilot type solenoid valve that switches the step with supply pressure. Generally used for a wide range of cylinder control. Select a manifold shape and wiring type in accordance with the application.
Direct drive type solenoid valve
● The stem is switched by the power of the solenoid, resulting in a direct operation type solenoid valve that can use operating pressures from 0 MPa. Perform for low-pressure control and air blowing.
Explosion-proof type solenoid valve
● Explosion proof solenoid valve with d2D4 explosion-proof structure.
Air-piloted valves
● Direction control valve that switches the stem by external air operation. Control valve can be remote controlled with air.
Water removal valves, check valves, etc.
● Water removal valves, check valves, shuttle valves, quick exhaust valves, and more.
Manual, foot operated type
● Control valve that can be operated by hand or by foot for stem switching. Perfect for cylinder control or air low path switching of semi-automatic machinery or jigs that employs air.
Mechanical valves
● Pressure direction control valve that switches the stem mechanically by hand or foot. A variety of actuators are available, including roller cam and ball cam types.
Combination
● New combinations in addition to the filter, regulator, lubricator three-item set.
Filter regulators
● Element type filer and regulator (pressure reducing valve) incorporated into a single unit.
Linear orifice type KSHJ
● Outstanding suction provided by an original linear orifice structure. A wealth of variations with a total of 18 series and 132 types. Support from gram units to ton units.
Linear orifice adjustment type KSHP
● The first linear orifice type with adjustment capabilities. Allows fine adjustment to suit impact speed and load. Maximum number of operations: more than 3 million. Compliant to H1 standards for food equipment specifications.
Fixed orifice type KSHA
● Effective shock and noise absorption, shorter cycle time, damage prevention, improved processing accuracy. Fixed absorbing capacity, linear orifice type
Linear orifice type KSHC (clean equipment)
● 0.1μm low particle generation provides cleanliness equivalent to JIS ISO Class 5. (FED-STD Class 100 equivalent), silicon free. Reduces the impact value during impact.
Multi orifice adjustment type KSHE
● Effective shock and noise absorption, shorter cycle time, damage prevention, improved processing accuracy. Multi orifice type. Self-correction type that is perfect for the impact end during high-speed operation.
Multi orifice adjustment type with sensor KSHES
● Multi orifice type with sensor switches. Simultaneously performs total impact cushioning along with position detection.
Linear orifice pressure resistant type KSHK
● Linear orifice type pressure resistant type. Can be used by insertion into a pressurized cylinder.
Single orifice type KSH
● Single orifice type. Perfect for low-speed impact.
Shock absorber of cylinder option
● For cylinder with shock absorber only.
Impexron Ltd.
bul. "6-ti septemvri" 254, 4006 Plovdiv, Bulgaria
Phone:
+359 32 571 212
Fax:
+359 32 321 418
E-mail:
sales@impexron.bg