+1 973 536 2331

sales@yusaki.jp

Ari Armaturen ZG1 in JAPAN

Get the best sales prices in JAPAN for Ari Armaturen ZG1 from Yusaki LLC.

Product: ZG1

Brand: Ari Armaturen

Country: Japan

Techical specification: Oberflächentemperaturfühler für SONAPHONE E/K/M (T max = 800°C) passend für ARImetec-S

Condition: New (Unused)

Do you need ZG1 for a broken machine or new application? Yusaki LLC is the solution you were looking for!

Our team of experts is ready to find the best cheap prices for products of Ari Armaturen - ZG1 in Japan.Use high quality products from Ari Armaturen if you want to ensure your production.Don't waste your time trying to source different spare parts from different suppliers, instead just ask us.We are not a distributor of Ari Armaturen but we can sell their products to you on good prices.Purchase high quality spare parts of Ari Armaturen - ZG1 in Japan on cheap prices.Don’t hesitate to become one of our customers, you will not regret it!

Get an offer by sending us an inquiry via e-mail or through our online request form.

Our company is not an authorized distributor or representative for this brand. We are a reseller company for this brand.

Other products from Ari Armaturen

0277000032 module for position

0466000325 Potentiometer Megatron kpl. Gleitst. 1000Ohm einf

0466000403 Anbausatz Wegschalter PREMIO Standard Bauteil beinhaltet die Wegschalterplatine sowie jeweils die 3 Schrauben

911100028G191 ARI-PREMIO 2,2kN (Elektrischer Schubantrieb ARI-PREMIO Elektrischer Schubantrieb ARI-PREMIO 2,2kN BLDC 2,2kN gemäß Datenblatt PREMIO Spannung : 24V AC/DC Stellgeschwindigkeit : 0.38mm/sec Stellzeit : 79s Spindelüberstand : 83mm Kupplung : Gewinde M12 Ventilhub : Hub 30mm Anschlußplatine : PREMIO BLDC kpl. Schaltschlitten : ja)

ARI -SAFE cylinder safety valve DN50 / 80, PN 4 bar

ARI -SAFE DN 65/100 safety valve DN65 / 100, PN 6 bar

ARI -SAFE DN40/65 safety valve DN40/ 65, PN 6 bar

ARI -SAFE ELECTRONIC CONTROLLER Original Spare Part

ARI-PACO 0,85Y Electric actuator

ELEKTRISCHER HLK-SCHUBANTRIEB ARI-PACO 0,85KN Electric actuator

FIGUR 22.450 DN 150 (ARI-STEVI 450/423,Stellventil in Dreiwegeform mit Flanschen, JS1049 DN150,Nenndruck : PN 16 Flanschbohrung : nach DIN PN16 Funktion des Ventils : Mischfunktion Kvs-Wert : 320 Kennlinie : linear Spindelabdichtung : Dachmanschetten/PTFE-Graphit Antrieb : DP34 Wirkw.(b.pneum.Antr) : Feder schließt Anschluß "B" Federberei.(bar)/Hub(mm) : 0.80-2.40 Hub 50mm erford. Stelldruck (bar) : 3.2 bar max. zul. Stelldruck (bar) : 6 max. Schließdruck (bar) : 3.2 Stellungsregler : EPS 13 Eingangssignal : 4 - 20mA 2-Leiter Eingestellt : 4 mA Sitz B geschlossen Eing. m. Zuluft (bar) : 6 bar

FIGUR 23.003 / DN 50 / ARI-CHECKO-V (Rückschlagventil in Durchgangsform mit Flanschen Kegel:Loser Kegel mit Feder JS1049 DN 50 PN25)

FIGUR 23.470 / DN 50 / ARI-STEVI 470/422 (Stellventil in Durchgangsform mit Flanschen und schaftgeführtem Kegel JS1049 DN 50)

FIGURE 901/902,WERKSTOFFE EXHAUST GAS BOILER SAFETY VALVE ,MATERIAL WIRE TYPE C OVER ALL LENGTH = 1100 MM OUTE DIA OF SPRING=40 MM SPRING COIL DIA = 6 MM

REPAIR KIT FOR DN 50 flanged steam fence brand ARMATUREN DN 50. repair kit

SELF TAPPING SCREW FOR ARI-PREMIO 5.0 KN S/N 444990 Original Spare Part

Gasket-Item 7 for safety valve ARI ARMATUREN type ARI-SAFE-P fig 921 EN ISO 4126-1 gasket for valve

Spindle-item 14 for safety valve ARI ARMATUREN type ARI-SAFE-P fig 921 EN ISO 4126-1 spindle

Sealing ring-item 27 for safety valve ARI ARMATUREN type ARI-SAFE-P fig 921 EN ISO 4126-1 sealing ring

Yusaki LLC

584-0023 2-2-16 Wakamatsuchohigashi, Tondabayashi City, Osaka Prefecture

Phone:
+81 721-26-8450

Fax:
+81 721-26-7242

E-mail:
sales@yusaki.jp

| |