+1 973 536 2331
sales@yusaki.jp

Bryan Donkin Gas Technologies BD 226 SZ - Rp1 1/2" in JAPAN

Get the best sales prices in JAPAN for Bryan Donkin Gas Technologies BD 226 SZ - Rp1 1/2" from Yusaki LLC.

Product: BD 226 SZ - Rp1 1/2"
Brand: Bryan Donkin Gas Technologies
Country: Japan
Description: Original Spare Part
Techical specification: 226SZ6262GJ--W Eingangsdruckregelgeraet Viton-Winkel Nennweite:1 1/2" (Innengewinde) zul.Druck PS: 500 mbar Werkstoff:Alu Sollwerteinstellbereich: -4 bis +1 mbar Einbau: Federdom unten Ventilsitz: 37 mm max. Betriebstemp.: 90 C Besonderheit: Kurbelgehaeuseentlueftung mit Viton-Membrane Messletingsanschluss EO8-Winkel Lackierung:RAL 1021 Kennzeichnung mit: Viton Zolltarifnummer: 90269000 Ursprungsland: Grossbritanien 1. 1/2" SERIES 226SZ VENT CONTROL VALVE ALUMINIUM CONSTRUCTION,WITH VITON MAIN & MIDDLE DIAPHRAGM,FITTED WITH STANDPIPE & ELBOW FOR ECL CONNECTION,WIRE SEAL FACILITY, END CONNECTIONS TO B.S.P PARRALEL THREAD (Rp) NAME PLATE : NP435 MAXIMUM PRESSURE:500 MBAR BODY MATERIAL:ALUMINIUM SPRING RANGE:+1 BIS -4 M BAR ORIFICE SIZE:37 MM MAXIMUM TEMPERATURE:90 DEGREES C SPECIAL : FOR CRANK CASE VENTING SPRING HOUSING INVERTED WITH VITON DIAPHRAGMS MEASURING LINE EO8-ELBOW SHOP NOTE PAINTED RAL 2021 (CANARY YELLOW) TO BE MARKED: VITON RMG STOCK CODE 80251354
Condition: New (Unused)
SEND INQUIRY

You can reach BD 226 SZ - Rp1 1/2" and all of the required spare parts of Bryan Donkin Gas Technologies from our wide sales network.

Our team of experts is ready to find the best cheap prices for products of Bryan Donkin Gas Technologies - BD 226 SZ - Rp1 1/2" Original Spare Part in Japan.Use high quality products from Bryan Donkin Gas Technologies if you want to ensure your production.Get the best spare parts prices from a single source, don't waste time seeking for different suppliers when you can just go with one.We are not an official representative of Bryan Donkin Gas Technologies, but we are selling their products at good prices.Buy the original product of Bryan Donkin Gas Technologies - BD 226 SZ - Rp1 1/2" Original Spare Part in Japan at reasonable price.Don’t hesitate to become one of our customers, you will not regret it!You may fill out our request form or send your enquiry by e-mail.
200 WS-026-1 (Viton Diaphragm)-1.pdf.pdf
Our company is not an authorized distributor or representative for this brand. We are a reseller company for this brand.

Other products from Bryan Donkin Gas Technologies

270 P-MK.2-ECL-309LP-OPCO-IND Combined Regulator and Safety Cut-Off Valve, (Over Pressure Operated). Spring loaded, single brass orifice, nitrile synthetic rubber diaphragm and valve seating, both functions externally impulsed (ECL), no internal relief facility, having ductile iron body and aluminium diaphragm casing, horizontal inlet and outlet connections. Part Number 270BP7373E-V-2B End Connections BSP Taper (BS21 Rc) Inlet Pressure Rating 10.3 bar g (dependant on orifice size fitted) Temperature Range -20 to +60 DegC
Bryan Donkin Gas Technologies
270 P-MK.2-ECL-309LP-OPCO-IND-ECL Combined Regulator and Safety Cut-Off Valve, (Over Pressure Operated, with indicator). Spring loaded, single brass orifice, nitrile synthetic rubber diaphragm and valve seating, both functions Externally impulsed (ECL), no internal relief facility, having ductile iron body and aluminium diaphragm casing, horizontal inlet and outlet connections. Part Number 270BPE-E-E-V-2B End Connections BS EN 1092-2 1997 PN16 Inlet Pressure Rating 10.3 bar g (dependant on orifice size fitted) Temperature Range -20 to +60 DegC
Bryan Donkin Gas Technologies
50MM FIG 270-3 SPRING NO995 - OBSOLETE (WITH NO DIRECT REPLACEMENT) NATURAL GAS STATION PRV, MAXIMUM INLET PRESSURE 4 BAR OUTLET PRESSURE 2.35 BAR SIZE 2”, LENGTH 190MM FOUR HOLE FLANGE
Bryan Donkin Gas Technologies
BD RP 1 1/2 226 SZ NR; 80250295 pressure regulator
Bryan Donkin Gas Technologies
309LP-ECL-IND Over Pressure Cut Off Valve Original Spare Part
Bryan Donkin Gas Technologies
277 R-ECL-309LP Hi-Flo Regulator Original Spare Part
Bryan Donkin Gas Technologies
Spare Kit Set for Type: fig 274'P-OPCO 2" Original Spare Part
Bryan Donkin Gas Technologies
REPLACEMENT KIT FOR TYPE FIG274'P-FLANGED 2'' 10.3BAR FIG 274'P-OPCO 2'' 10.3BAR
Bryan Donkin Gas Technologies
240-P3333U Original Spare Part
Bryan Donkin Gas Technologies
201 LA065 gas regulator
Bryan Donkin Gas Technologies
240R/ 3/4 /Rc/CI Gas regulator
Bryan Donkin Gas Technologies
202/WS-001 Spares Kit
Bryan Donkin Gas Technologies
202/WJ/020 Safety diaphragm
Bryan Donkin Gas Technologies
BD-RMG 305 valve
Bryan Donkin Gas Technologies
BD 226 SZ- Rp 1 1/2 Viton Elbow (226SZ6262GJ---W) (RMG STOCK CODE : 80251354)
Bryan Donkin Gas Technologies
RM6 Regulator
Bryan Donkin Gas Technologies
2006/02/10956-10 regulator
Bryan Donkin Gas Technologies
Spare parts kit for 2006/02/10956-10 Original Spare Part
Bryan Donkin Gas Technologies
Repair Kit For: fig 270 MKII Flanged 2''
Bryan Donkin Gas Technologies
Spares Kit 226SZ 50MM
Bryan Donkin Gas Technologies

Yusaki LLC

584-0023 2-2-16 Wakamatsuchohigashi, Tondabayashi City, Osaka Prefecture

Phone:
+81 721-26-8450

Fax:
+81 721-26-7242