IEI WSB-H610-R10 in JAPAN

Description: WSB-H610-R10

Techical specification: CPU LGA1155 socket supports Intel® Core™ i7/i5/i3/Pentium®/Celeron® processor PCH Intel® H61 BIOS UEFI System Memory Two 240-pin 1333/1066MHz dual-channel DDR3 & DDR3L (1.35V) DIMMs supported (system max. 16GB) Ethernet LAN1: Realtek RTL8111E PCIe GbE controller with ASF 2.0 support LAN2: Realtek RTL8111E PCIe GbE controller I/O Interface 2 x RS-232 1 x RS-422/485 1 x LPT 1 x FDD 1 x PS/2 KB/MS 1 x 6-pin wafer for KB & MS 7 x USB 2.0 (1 on rear, 6 by pin header) 4 x SATA 3Gb/s (H61 doesn't support AHCI & RAID) Digital I/O 8-bit digital I/O (4-bit input, 4-bit output) Super I/O Fintek F81866 TPM 1 x TPM connector (2x10 pin) SMBus 1 x 4-pin wafer Audio Supports 7.1 channel HD audio by IEI AC-KIT-892HD-R10 kit Display Interfaces 1 x VGA (up to 2048 x 1536 @75Hz) 1 x DVI-D (up to 1920 x 1200 @60Hz) (via header to IO-KIT-001-R20 DVI-D/USB module) (optional) Expansion PCI signal and ISA signal via golden finger Watchdog Timer Software programmable supports 1~255 sec. system reset Power Supply 5V/12V, AT/ATX support Power Consumption 5V@4.53A, 12V@0.19A, Vcore_12V@7.81A, 5VSB@0.18A (3.4GHz Intel® Core™ i7-2600K with two 2GB 1333MHz DDR3 memory) Graphic Intel® HD Graphics Gen 6 supports DX10.1 and OpenGL 3.0 Full MPEG2, VC1, AVC Decode Operating Temperature -10°C ~ 60°C Storage Temperature -20°C ~ 70°C Humidity 5% ~ 95%, non-condensing Dimensions 338 mm x 122 mm Weight GW: 1000g/NW: 260g Embedded Controller ITE IT8519E Front Panel 1 x Front panel (power LED, HDD LED, speaker, power button, reset button) I2C 1 x 4-pin wafer PCIe-PCI Bridge ITE IT8892E PCI-ISA Bridge ITE IT8888G Fan Connector 1 x 4-pin smart fan connector 1 x 4-pin system fan connector

Condition: New (Unused)