Lowara LSN125-100-200S1VV1-7502 in JAPAN

Techical specification: Materials: Impeller: alloy cast steel, 1.4408 Casing: alloy cast steel, 1.4408 casing cover: alloy cast steel, 1.4408 Shaft: alloy steel, 1.4021 shaft sleeve: Stainless Steel Wear rings: without (Standard) Shaft seal: S1..1 Cyclone seal chamber with smooth shaft sleeve Shaft seal MG912 Single seal rubber bellow, unbalanced Materialcombination: BQ1EGG Fluid: Water, pure Temperature: 4 °C Density: 1,000 kg/dm³ Viscosity: 1,569 mm²/s Capacity: 256,0 m³/h Head: 70,0 m Power: 60,9 kW Efficiency: 80,6 % NPSH: 6,26 m Speed: 3550 1/min Req. Motor power: 71,9 kW Suction flange: DN 125, PN16, EN 1092 (IC) horizontal at centerline Discharge flange: DN 100, PN16, EN 1092 (IC) vertical at top-centerline max. Casing pressure: 16 bar Suction-/Systempressure: 0,10 bar Lubrication:Oil (Standard) Oilsump cooling: without Oilsump cooling Constant level oiler: without constant level oiler, with sight glass Labyrinth seals: without Motor Brand: WEG Type: W22 - 280 S/M - 75kW Nom. power: 75 kW Nom. current: 78,6 A Voltage: 660 V Frequency: 60 Hz Speed: 3570 1/min Design: IM B3 Size: 280 S/M Isolation class: F Protection class: IP55 Total weight: 935,2 kg Painting LSN Standard Type: Extended standard coating level 2 Mark: Standard LSN Application: Pumps and machines for use in wet rooms or outside Temperature: max. 140°C Preparation: Sandblasting SA 2 1/2 acc. DIN 55928, Part 4 Primer coat: Two component Epoxy Resin - Zinc Phosphate Primer: Remoplast RT Colouring Oxydrot Thickness: 40 my Finish coat: Pump Chlorinated Rubber Typ Firewood 781 Thickness: 50 my Finish coat: Frame and Motor Epoxyharz-Polyamino-Amidaddukt with Micaceous iron ore, Remoplast UVC Thickness: 40 my Colour Pump: RAL 5010 blue Colour Frame: RAL 5010 blue Colour Motor: RAL 5010 blue Colour Coupling guard: RAL 5010 blue stainless without painting Boxing P4 - covered in foil (0.7-5m³) Goods covered in foil 0,3mm and put into a fully closed wooden box made from 3/4" (standard) or 1" pine wood boards. Pine wood blocks 80 x 100 mm underneath the base boards allow the whole unit to be transported by means of a forklift. This type of boxing is stackable. Goods secured against shifting during transportation by means of bolts or styrofoam chips. Application: ship (container), airfreight, truck For outdoor storage up to max. 3 month Brutto-Volumen: 0,95839 mm m³

Condition: New (Unused)