Valtek V701 DKVNU in Turkey

Technical specification: Control Valve DN 32, PN 40 Type V701 Valtek GS Single seat-control valve Body D Straight way, 3-flange Connection type K Flange, surface form B1 acc. to EN 1092-1 Balance V Not balanced Bonnet N Standard bonnet Stuffing box packing U PTFE TA-Luft spring loaded Body material no. 1.0619 cast steel Regulations for material O PED Standard Material certificate O No certificate Regulations for final test A EN 1349 Standard (IEC-534/FCI 70-2) Final test certificate O No certificate Plug design P Parabolic plug Trim equipment O Without additional trim equipment Construction N Standard Seat leakage P Class IV IEC/FCI (0,01 % off Kvs/cv-value) Plug guiding 1 Double stem guided Characteristic G Modified equal percentage Flow direction G Pressure opens the plug Seat 34 mm kvs-value 22,4 m3/h Stroke 20 mm Trim material no. 316 SS Painting Valve body: Epoxy paint V16 Standard/Actuator Manufacturerstandard Max. diff. pressure 10,000 bar Nec. force 1926 N Actuator AG 102 Elec. supply Z 230 V, 50 Hz Transmitter P 1000 Ohm potentiometer Positioner O No positioning electronics Closing speed 15,000 mm/min Protection class IP 65 DIN 40050 Closing-torque switch 1 pc. adjusted at 2.000,000 N Opening-limit switch 1 pc.

Condition: New (Unused)