Calectro UG-5-A60 in UNITED STATES

Get the best sales prices in UNITED STATES for Calectro UG-5-A60 from Onrion LLC.

CHARACTERISTICS
- Multivoltage: 24V AC/DC and 120V AC
- High efficient single sampling tube
- Easy to install
- Four different mounting positions (0°, 90°, 180° or 270°)
enables flexible installation. Patented.
- Automatic sensitivity adjustment
FUNCTION
Smoke entering the duct system will be dispersed throughout
the whole building. The Uniguard duct detectors utilizes the
photoelectric sensing method and is designed to sense the
existence of smoke in the duct. This design of the housing
along with the detector technology is capable of detecting
unsafe conditions by sampling the air through the duct. When
the smoke is detected, it will emit a signal that will create the
urgency for proper action to be taken to turn off circulating fans,
blowers and any other auxiliary devices that are connected to
the system. The actions taken will enable the management
of hazardous smoke through the entire space that is being
protected by the duct detection arrangement.
Uniguard has the option of operating with 24V DC/AC or
120V AC. Alarm and supervisory relay contacts are accessible
to interface with control panel, HVAC control, and multiple
auxiliary functions including turning off the fan.
The Uniguard can be installed on any side of the duct in four
different positions: 0°, 90°, 180° and 270°.
The detector UG-5-A6O contains an intelligent controlling
circuit. This circuit is adjusting the sensitivity to give an
optimal function during the whole life time of the detector.
When the controlling circuit can no longer compensate for
contamination, a service alarm is indicated.

ORDERING EXAMPLE
Item code Designation
UG-5-A6O Duct smoke detector
ST1 Sampling tube length: 1 ft (0.3 m)
ST2 Sampling tube length: 2 ft (0.6 m)
ST5 Sampling tube length: 5 ft (1.5 m)
ST9 Sampling tube length: 9 ft (2.8 m)

Other products from Calectro