Modell LCE British Encoder in DEUTSCHLAND

121/1 08A 1000 NC HV 5V 1ST Encoder

British Encoder

725/1-10F-F1-0180-Q-HV-1-SY-ST-IP65 (Series 725, 10mm male shaft with a flat, square flange body, 180 pulses per revolution, A & B channel’s with comps, HV output, 100khz frequency response, side mounted 7 pin MS plug, standard operating temperature and sealed to IP65.)

British Encoder

735/BV(ODER B4?) V5-24

British Encoder

735-L1 PPR:2500 +VE:5 Original Spare Part

British Encoder

755 OC PPR: 200 V+: 5-24v

British Encoder

755/1/HV 500 PPR 5-24 VOLT

British Encoder

755/1-HV-1000 -

British Encoder

755HS/1-04-FF-0500-R-HV-G2-ST (Series 755, 6mm hollow shaft, fixed foot flex mount, 500 pulses per revolution, A, B & Z channel’s with comps, HV output, side exit 2 meter cable & standard temperature.)

British Encoder

755HS/2-04-FF-1024-R-HV-G2-HT (encoder)

British Encoder

758/4-6F-26-10000-HV-EG2-ST-IP50 encoder 758/HV N°297657 10000 PPR V+ 5-24 BN=A YE=A RED=B GN=B OR=Z BL=Z WH=5V BK=COMMON

British Encoder

760N/1-T05-FB-0360-NC-HV-G2-ST-IP50 Original Spare Part

British Encoder

760N/2-T05-FB-1220-NC-HV-G2-ST-IP50 Original Spare Part

British Encoder

B04409AA -755-OC

British Encoder

S-X-ST-IP50 2500-R-HV-1

British Encoder

TR1/PPS-24 Original Spare Part

British Encoder

TR1-E2-R6-0512-V1-OC-G2-ST-IP50 (Series TR1 (Tru-Trac), 200mm Urethane wheel, right hand side pivot mounting, 512 pulses per revolution, OC output circuit, 2 meters of cable, standard temp and IP50 sealing.)

British Encoder

TR1-MWB06KN-R6-1800-V1-PP-G2-ST-IP50 Series TR1 (Tru-Trac), 6” Knurled wheel, right hand side pivot mounting, 1800 pulses per revolution, Push Pull output circuit, 2 meters of cable, standard temp and IP50 sealing.

British Encoder

755HS/1-04-FF-1000-R-OC-G2-ST Original Spare Part

British Encoder

755HS/1-04-FF-0036-R-HV-G6-ST Original Spare Part

British Encoder

711-S-6-0050-HV-SW Original Spare Part

British Encoder