We supply high quality LABO-F012-S100KPH0H products for your new projects or which you may use to recover your broken equipment.
A member of our experts will get the cheapest sales prices for products of Honsberg - LABO-F012-S100KPH0H Flow switch in Bulgaria.
Using the products of Honsberg will minimize your costs on spare parts.
We know time is expensive, so let us find the best prices for spare parts and components for you.
We are not a distributor of Honsberg but we can sell their products to you on good prices.
Our company gives competitive pricing for Honsberg - LABO-F012-S100KPH0H Flow switch in Bulgaria.
Our company has proven itself as one of the best and valuable supplier in the world.
You may send us an inquiry by e-mail or by using our online contact form.
Characteristics :
The sensors of the LABO-F012 family are used for monitoring
non-viscous fluids (for oil or gases on request). They come
complete with electronics, and are supplied installed inside a
compact sensor housing of 12 mm diameter and with M12x1 round
plug outlet. The 16-bit processor carries out temperature
compensation and linearisation of the calorimetric signal
(measurement of the heat removal at the sensor tip by the flowing
medium; for this see also the general description for calorimetry).
The electronics of the LABO-F012-S are a flexibly configurable limit
switch.
The switching value can be set by the user via teaching (see
Handling and Operation). All other values have been preset at the
factory, but can be modified by the user with the aid of the
optionally available ECI-1 interface and a PC.
The adjustable parameters are:
● Switching value
● Hysteresis
● Minimum/maximum monitoring
● Switching delay
● Switchback delay
● Power-On delay
● Teach-offset
Technical data :
Sensor : Calorimetric measurement principle
Process connection : push-in sensor Ø12 mm
Switching range water : 2..150 cm/s or 3..300 cm/s oil or gases available on request
Measurement accuracy : dependent on the installation location and flow conditions typically ±10 % of full scale value or 2 cm/s, of full scale value measured in the T-piece ±5 %
Repeatability : ±1 %
Start-up time : 10 sec. after application of the operating voltage
Response : time 1..3 s
Pressure resistance Stainless steel compression fitting PN 40 bar
Plastic cone with union nut PN 10 bar
Medium temperature : -20..+ 70 °C -20..+100 °C (extended temperature range)
Ambient temperature : 0..+60 °C
Temperature dependency : ± 0.01 % / 1 K
Temperature gradient : 4 K/s
Materials medium-contact : Housing 1.4571
Materials nonmedium-contact : Plug PA6.6 gold-plated contacts
Supply voltage : 24 V DC ±10 % (controlled)
Power consumption : < 2 W
LED : yellow LED (On = Normal / Off = Alarm / rapid flashing = Programming)
Electrical connection : for round plug connector M12x1, 4-pole
Ingress protection : IP 67
Weight approx. : 0.05 kg
Impexron Ltd.
bul. "6-ti septemvri" 254, 4006 Plovdiv, Bulgaria
Phone:
+359 32 571 212
Fax:
+359 32 321 418
E-mail:
sales@impexron.bg