Product: LANTIME M300/SCADA/FREQ-3
Country: Bulgaria
Description: Surge voltage protector
Techical specification: 00088888
NTP time server
The system provides the following inputs/outputs:
4 x LAN interface, RJ45 connector, status LEDs for link, activity, speed (10/100 MBit)
1 x RS232 front panel interface , 9pin D-Sub male connector for
initial setup and configuration
1 x USB (Rev. 1.1) front panel interface to:
- install firmware upgrades
- backup and restore configuration files
- copy security keys
- lock/unlock front panel keys
3 x Bicolor LEDs: Ref. time (e.g. GPS), Time Synchronization Service (NTP)
and Network-Link status
1 x Red alarm LED (configurable)
1 x LC display, 40 character x 2 rows
1 x Meinberg GPS antenna input, BNC female connector, isolated
Signal Outputs:
2 x RS232 interface, independent, 9pin D-Sub female connector,
with following data formats:
Meinberg Standard-Telegram, SAT, NMEA0183 (RMC), Uni Erlangen (NTP),
COMPUTIME, SYSPLEX-1, SPA, RACAL
1 x pulse per second (PPS), TTL into 50 ohm, pulse duration 200 msec,
active high, female BNC connector
2 x pulse per minute (PPM), TTL into 50 ohm, pulse duration 200 msec,
active high, female BNC connector
1 x standard frequency 10 MHz, TTL into 50 ohm, female BNC connector
3 x programmable Outputs (P_OUT), Photo-MOS output (400VAC / DC; 150mA);
2pin DFK connector
1 x Alarm Relay Output, change-over contact, 3pin DFK connector
1 x RS232 interface (COM0 FDM511), 9pin D-Sub male connector
1 x RS232/RS422 interface (COM1 FDM511), 9pin D-Sub male connector
Internal components:
- GPS C/A code receiver
- OCXO-HQ Timebase
- Single board computer with Linux operating system, supporting the following protocols:
NTP/SNTP v4, Time protocol (RFC 868), Daytime protocol (RFC 867),
SNMP v1,2,3, SNMP Traps, SSH v2, IP v4, IP v6, DHCP client, HTTP(S),
Email, FTP, Telnet, Syslog
- LNE, LANTIME Network Expansion,
additional network ports for LANTIME Time Server
- FDM511M frequency deviation monitor module
- RELAQV relay output card (progr. Pulse)
- RS422 converter print
- Power Supply (100-240VAC / 100-240VDC)
- Metal 19" modular chassis, 1U/84HP, slimline (483mm wide x 43mm high x 285mm deep
HS Code: 9105 9100
Ursprungsland: BR-Deutschland
Condition: New (Unused)
Impexron Ltd. is here to help you with procurement of LANTIME M300/SCADA/FREQ-3 Surge voltage protector and other products and spare parts of MEINBERG.
Our team of experts is ready to find the best cheap prices for products of MEINBERG - LANTIME M300/SCADA/FREQ-3 Surge voltage protector in Bulgaria.
Minimize your expenses with the high quality products of MEINBERG.
Using our professional services will help you be more competitive on the market and it will save you time.
We're not an official distributor of MEINBERG, yet we are importing it on reasonable prices.
Buy the original product of MEINBERG - LANTIME M300/SCADA/FREQ-3 Surge voltage protector in Bulgaria at reasonable price.
Don’t hesitate to become one of our customers, you will not regret it!
Contact us by e-mail or just fill out our RFQ form online.
Our company is not an authorized distributor or representative for this brand. We are a reseller company for this brand.