Product: LANTIME M300/SCADA/FREQ-3
Country: Japan
Description: Surge voltage protector
Techical specification: 00088888
NTP time server
The system provides the following inputs/outputs:
4 x LAN interface, RJ45 connector, status LEDs for link, activity, speed (10/100 MBit)
1 x RS232 front panel interface , 9pin D-Sub male connector for
initial setup and configuration
1 x USB (Rev. 1.1) front panel interface to:
- install firmware upgrades
- backup and restore configuration files
- copy security keys
- lock/unlock front panel keys
3 x Bicolor LEDs: Ref. time (e.g. GPS), Time Synchronization Service (NTP)
and Network-Link status
1 x Red alarm LED (configurable)
1 x LC display, 40 character x 2 rows
1 x Meinberg GPS antenna input, BNC female connector, isolated
Signal Outputs:
2 x RS232 interface, independent, 9pin D-Sub female connector,
with following data formats:
Meinberg Standard-Telegram, SAT, NMEA0183 (RMC), Uni Erlangen (NTP),
COMPUTIME, SYSPLEX-1, SPA, RACAL
1 x pulse per second (PPS), TTL into 50 ohm, pulse duration 200 msec,
active high, female BNC connector
2 x pulse per minute (PPM), TTL into 50 ohm, pulse duration 200 msec,
active high, female BNC connector
1 x standard frequency 10 MHz, TTL into 50 ohm, female BNC connector
3 x programmable Outputs (P_OUT), Photo-MOS output (400VAC / DC; 150mA);
2pin DFK connector
1 x Alarm Relay Output, change-over contact, 3pin DFK connector
1 x RS232 interface (COM0 FDM511), 9pin D-Sub male connector
1 x RS232/RS422 interface (COM1 FDM511), 9pin D-Sub male connector
Internal components:
- GPS C/A code receiver
- OCXO-HQ Timebase
- Single board computer with Linux operating system, supporting the following protocols:
NTP/SNTP v4, Time protocol (RFC 868), Daytime protocol (RFC 867),
SNMP v1,2,3, SNMP Traps, SSH v2, IP v4, IP v6, DHCP client, HTTP(S),
Email, FTP, Telnet, Syslog
- LNE, LANTIME Network Expansion,
additional network ports for LANTIME Time Server
- FDM511M frequency deviation monitor module
- RELAQV relay output card (progr. Pulse)
- RS422 converter print
- Power Supply (100-240VAC / 100-240VDC)
- Metal 19" modular chassis, 1U/84HP, slimline (483mm wide x 43mm high x 285mm deep
HS Code: 9105 9100
Ursprungsland: BR-Deutschland
Condition: New (Unused)
We supply high quality LANTIME M300/SCADA/FREQ-3 products for your new projects or which you may use to recover your broken equipment.
Our team of experts is ready to find the best cheap prices for products of MEINBERG - LANTIME M300/SCADA/FREQ-3 Surge voltage protector in Japan.By buying products of MEINBERG and using our service you get high quality products with cheap prices.Our job is to save you time and minimize your expenses on spare parts and industrial components.We are not an official representative of MEINBERG, but we are selling their products at good prices.Buy the original product of MEINBERG - LANTIME M300/SCADA/FREQ-3 Surge voltage protector in Japan at reasonable price.Don’t hesitate to become one of our customers, you will not regret it!
Get an offer by sending us an inquiry via e-mail or through our online request form.
Our company is not an authorized distributor or representative for this brand. We are a reseller company for this brand.