+1 973 536 2331

sales@yusaki.jp

Monitran 2285M8-4P-25 in JAPAN

Get the best sales prices in JAPAN for Monitran 2285M8-4P-25 from Yusaki LLC.

Product: 2285M8-4P-25

Brand: Monitran

Country: Japan

Description: Accelerometer with 4pin Lumberg connector,Fully isolated, 4-20mA = 0-25mm/s output, Male M8 mounting ,Frequency response 2Hz- 1KHz

Condition: New (Unused)

You can reach 2285M8-4P-25 and all of the required spare parts of Monitran from our wide sales network.

Contact us to get an assistance from an expert for sales prices for Monitran - 2285M8-4P-25 Accelerometer with 4pin Lumberg connector,Fully isolated, 4-20mA = 0-25mm/s output, Male M8 mounting ,Frequency response 2Hz- 1KHz in Japan.Use high quality products from Monitran if you want to ensure your production.Get the best spare parts prices from a single source, don't waste time seeking for different suppliers when you can just go with one.

We are not the official distributor of Monitran but we supply their products at reasonable prices.

We are selling Monitran - 2285M8-4P-25 Accelerometer with 4pin Lumberg connector,Fully isolated, 4-20mA = 0-25mm/s output, Male M8 mounting ,Frequency response 2Hz- 1KHz in Japan at competitive prices!During the past years we managed to develop enough to satisfy the requirements of our customers.You may fill out our request form or send your enquiry by e-mail.

Our company is not an authorized distributor or representative for this brand. We are a reseller company for this brand.

Other products from Monitran

1188C-5 MTN Messbereich: 0 - 5 g RMS

CABLE L=5M FOR VM-1185C Original Spare Part

IC-3210ST indicator

LVDT position transducer,in the amount of 2 Output 4-20 mA, material stainless steel, average maximum length of 100mm, linearity ± 0.25%.

MTN 1185CM8-25F (Messbereich: 0 - 25 mm/s rms Speisung: 12 - 32 VDC Signal: 4 - 20 mA el. Anschluss: Kabel, 5 m mech. Anschluss: Außengewinde M8 low pass Filter: 1 kHz)

MTN/1105CE (Accelerometer, 50pC/g output, 1/4"- 28UNF female mounting, high temperature 120 C. low noise PTFE cable 5 metres, fitted with in line charge amp to give 100mV/g output)

MTN/1120IQ Sensitivität: 100 mV/g Montage: Innengewinde Quick Fit

MTN/1185-20-M81 Geschwindigkeitssensor Messbereich: 0 -20 mm/s rms Speisung: 12 - 32 VDC Signal: 4 - 20 mA el. Anschluss: Gerätestecker 3-polig mech. Anschluss: Außengewinde M8

MTN/1185C-20 Geschwindigkeitssensor Messbereich: 0 - 20 mm/s rms Speisung: 12 - 32 VDC Signal: 4 - 20 mA el. Anschluss: Kabel, 5 m mech. Anschluss: Innengewinde 1/4" UNF

MTN/1185CM8-10F ,

MTN/1185CMG-XX (Messbereich: 0 - xx mm/s rms Speisung: 12 - 32 VDC Signal: 4 - 20 mA el. Anschluss: Kabel, 5 m mech. Anschluss: Außengewinde Mg)

MTN/1185-CQ-20 piezoel. Geschwindigkeitssensor

MTN/1185CQ-20-15M CABLE piezoel. Geschwindigkeitssensor

MTN/1185CQ-25 Beschleunigungssensor

MTN/1185HC 0-10MM/S 4-20 F Original Spare Part

MTN/1185HCM12-10 Geschwindigkeitssensor Messbereich: 0 - 10 mm/s rms Speisung: 12 - 32 VDC Signal: 4 - 20 mA el. Anschluss: Kabel, 5 m mech. Anschluss: Außengewinde M12

MTN/1185IC-25 SENSOR TYPE:VIBRATION;

MTN/1185ICQ Schwinggeschwindigkeitsaufnehmer

MTN/1185M8-100 Sensitivität: 0 - 100 mm/s rms dynamischer Bereich: ±50 g Frequenzgang: 2 bis 1.000 Hz Temperaturbereich: -25 bis +90 °C el. Anschluss: Stecker 3-pin 62GB Gewicht: ca. 140 gr. Ausgang: 4-20 mA Speisung: 12 bis 32 V mech. Anschluss: M8 male Schutzart: IP 67

Yusaki LLC

584-0023 2-2-16 Wakamatsuchohigashi, Tondabayashi City, Osaka Prefecture

Phone:
+81 721-26-8450

Fax:
+81 721-26-7242

E-mail:
sales@yusaki.jp

| |