+1 973 536 2331

sales@yusaki.jp

Monitran CABLE L=5M FOR VM-1185C in JAPAN

Get the best sales prices in JAPAN for Monitran CABLE L=5M FOR VM-1185C from Yusaki LLC.

Product: CABLE L=5M FOR VM-1185C

Brand: Monitran

Country: Japan

Description: Original Spare Part

Condition: New (Unused)

You can buy the CABLE L=5M FOR VM-1185C Original Spare Part product with competitive prices and the shortest delivery time through our support team in Japan.

Contact us to get an assistance from an expert for sales prices for Monitran - CABLE L=5M FOR VM-1185C Original Spare Part in Japan.Minimize your expenses with the high quality products of Monitran.Using our professional services will help you be more competitive on the market and it will save you time.We're not an official distributor of Monitran, yet we are importing it on reasonable prices.Grab the best offer for Monitran - CABLE L=5M FOR VM-1185C Original Spare Part in Japan.With each day we gain more and more experience and that's why we are able to satisfy your needs for spare parts.

Get an offer by sending us an inquiry via e-mail or through our online request form.

Our company is not an authorized distributor or representative for this brand. We are a reseller company for this brand.

Other products from Monitran

1188C-5 MTN Messbereich: 0 - 5 g RMS

2285M8-4P-25 Accelerometer with 4pin Lumberg connector,Fully isolated, 4-20mA = 0-25mm/s output, Male M8 mounting ,Frequency response 2Hz- 1KHz

IC-3210ST indicator

LVDT position transducer,in the amount of 2 Output 4-20 mA, material stainless steel, average maximum length of 100mm, linearity ± 0.25%.

MTN 1185CM8-25F (Messbereich: 0 - 25 mm/s rms Speisung: 12 - 32 VDC Signal: 4 - 20 mA el. Anschluss: Kabel, 5 m mech. Anschluss: Außengewinde M8 low pass Filter: 1 kHz)

MTN/1105CE (Accelerometer, 50pC/g output, 1/4"- 28UNF female mounting, high temperature 120 C. low noise PTFE cable 5 metres, fitted with in line charge amp to give 100mV/g output)

MTN/1120IQ Sensitivität: 100 mV/g Montage: Innengewinde Quick Fit

MTN/1185-20-M81 Geschwindigkeitssensor Messbereich: 0 -20 mm/s rms Speisung: 12 - 32 VDC Signal: 4 - 20 mA el. Anschluss: Gerätestecker 3-polig mech. Anschluss: Außengewinde M8

MTN/1185C-20 Geschwindigkeitssensor Messbereich: 0 - 20 mm/s rms Speisung: 12 - 32 VDC Signal: 4 - 20 mA el. Anschluss: Kabel, 5 m mech. Anschluss: Innengewinde 1/4" UNF

MTN/1185CM8-10F ,

MTN/1185CMG-XX (Messbereich: 0 - xx mm/s rms Speisung: 12 - 32 VDC Signal: 4 - 20 mA el. Anschluss: Kabel, 5 m mech. Anschluss: Außengewinde Mg)

MTN/1185-CQ-20 piezoel. Geschwindigkeitssensor

MTN/1185CQ-20-15M CABLE piezoel. Geschwindigkeitssensor

MTN/1185CQ-25 Beschleunigungssensor

MTN/1185HC 0-10MM/S 4-20 F Original Spare Part

MTN/1185HCM12-10 Geschwindigkeitssensor Messbereich: 0 - 10 mm/s rms Speisung: 12 - 32 VDC Signal: 4 - 20 mA el. Anschluss: Kabel, 5 m mech. Anschluss: Außengewinde M12

MTN/1185IC-25 SENSOR TYPE:VIBRATION;

MTN/1185ICQ Schwinggeschwindigkeitsaufnehmer

MTN/1185M8-100 Sensitivität: 0 - 100 mm/s rms dynamischer Bereich: ±50 g Frequenzgang: 2 bis 1.000 Hz Temperaturbereich: -25 bis +90 °C el. Anschluss: Stecker 3-pin 62GB Gewicht: ca. 140 gr. Ausgang: 4-20 mA Speisung: 12 bis 32 V mech. Anschluss: M8 male Schutzart: IP 67

Yusaki LLC

584-0023 2-2-16 Wakamatsuchohigashi, Tondabayashi City, Osaka Prefecture

Phone:
+81 721-26-8450

Fax:
+81 721-26-7242

E-mail:
sales@yusaki.jp

| |