Product: FP4-CA6-1-20-FS3-SO-RTD , 031781.05.02 (CEH1001/2)
Country: United States
Techical specification: Unit FP4-CA6-1-20-FS3-SO-RTD
Customer Reference CEH1001/2
Item Number 031781.05.02
Capacity 1.0 kW – client specified
Voltage 400V, 3Ph, 50/60Hz (4-W STAR)
Fixing DN80 PN40 EN1092-1 Blind RF 316L Stainless Steel Flange
Immersed Length 510mm of which 50mm is inactive
Cable Entries Main Terminal box: 1 x M32 & 1 x M25 complete with temporary plugs (terminals suitable for 4mm² as standard, please advise if larger supply cable is to be used)
HIHSPD140 Auxiliary Box : 2 x M20 complete with temporary plugs
Protection ATEX / IECEx Certified Ex II 2 G D Ex d IIC T4 Gb Zone 1 & 2 Ex tb IIIC T135°C Db Zone 21 & 22 - LCIE 01 ATEX 6056X IECEx LCI 06 0006X
Enclosure Powder Coated Mild Steel
Weatherproof IP66
Elements 6 off 12 mm diameter Removable 304 St/Steel Cartridge Elements housed in a 16 mm Plain Surface 316L Stainless Steel Sheath with 316L St/Steel Thermostat pockets
Stand Off 100mm
Heater Bundle 72 mm diameter
Watts Density 0,9W/cm²
Controls (VAC) (S1) 1 off Simplex PT100 process temperature RTD to be terminated within separate HIHSPD140 316L Stainless Steel Ex’d terminal box Max set point +65°C
(S2) 1 off Simplex PT100 Over temperature Limit RTD to be terminated within separate HIHSPD140 316L Stainless Steel Ex’d terminal box Max set point +80°C
(S3) 1 off Manual Reset Box Cut Out set at +80°C, located within the terminal box to prevent overheating
!Each heater must be fitted with 1 off (minimum) control sensing the heater mounting flange/process temperature and 1 off terminal box cut-out. The sensors shall be connected to a suitable temperature control system to shut down the heater in the event the maximum temperature is exceeded.
Over temperature control & cut-out must be manual reset either by:
a.) auto-reset control & auto reset cut-out being, reset at control panel by key switch or special tool.
b.) thermostat & cut-out being manual reset units, i.e. manual reset inside terminal box.
Test Pressure 20 Bar g
Working Pressure 13 Bar g
Weight Approx 19 kgs each
Ambient temperatures from -60°C up to +60°C - Note, if the ambient temperature is lower than -40°C, please contact sales
Condition: New (Unused)
Do you need FP4-CA6-1-20-FS3-SO-RTD , 031781.05.02 (CEH1001/2) for a broken machine or a new application? Onrion LLC is the solution you were looking for!
A member of our experts will get the cheapest sales prices for products of Exheat - FP4-CA6-1-20-FS3-SO-RTD , 031781.05.02 (CEH1001/2) in the United States.
Minimize your expenses with the high quality products of Exheat.
Our job is to save you time and minimize your expenses on spare parts and industrial components.
We are not an official representative of Exheat, but we are selling their products at good prices.
Purchase high-quality spare parts of Exheat - FP4-CA6-1-20-FS3-SO-RTD , 031781.05.02 (CEH1001/2) in the United States on cheap prices.
Don’t hesitate to become one of our customers, you will not regret it!
Send us your inquiry by e-mail or fill out our online contact form.
Our company is not an authorized distributor or representative for this brand. We are a reseller company for this brand.