+1 973 536 2331

Exheat FP4-CA6-1-20-FS3-SO-RTD , 031781.05.02 (CEH1001/2) en ESTADOS UNIDOS

Toma los mejores precios en ESTADOS UNIDOS por Exheat FP4-CA6-1-20-FS3-SO-RTD , 031781.05.02 (CEH1001/2) de Onrion LLC.

Producto: FP4-CA6-1-20-FS3-SO-RTD , 031781.05.02 (CEH1001/2)
Marca: Exheat
País: Estados Unidos
Techical specification: Unit FP4-CA6-1-20-FS3-SO-RTD Customer Reference CEH1001/2 Item Number 031781.05.02 Capacity 1.0 kW – client specified Voltage 400V, 3Ph, 50/60Hz (4-W STAR) Fixing DN80 PN40 EN1092-1 Blind RF 316L Stainless Steel Flange Immersed Length 510mm of which 50mm is inactive Cable Entries Main Terminal box: 1 x M32 & 1 x M25 complete with temporary plugs (terminals suitable for 4mm² as standard, please advise if larger supply cable is to be used) HIHSPD140 Auxiliary Box : 2 x M20 complete with temporary plugs Protection ATEX / IECEx Certified Ex II 2 G D Ex d IIC T4 Gb Zone 1 & 2 Ex tb IIIC T135°C Db Zone 21 & 22 - LCIE 01 ATEX 6056X IECEx LCI 06 0006X Enclosure Powder Coated Mild Steel Weatherproof IP66 Elements 6 off 12 mm diameter Removable 304 St/Steel Cartridge Elements housed in a 16 mm Plain Surface 316L Stainless Steel Sheath with 316L St/Steel Thermostat pockets Stand Off 100mm Heater Bundle 72 mm diameter Watts Density 0,9W/cm² Controls (VAC) (S1) 1 off Simplex PT100 process temperature RTD to be terminated within separate HIHSPD140 316L Stainless Steel Ex’d terminal box Max set point +65°C (S2) 1 off Simplex PT100 Over temperature Limit RTD to be terminated within separate HIHSPD140 316L Stainless Steel Ex’d terminal box Max set point +80°C (S3) 1 off Manual Reset Box Cut Out set at +80°C, located within the terminal box to prevent overheating !Each heater must be fitted with 1 off (minimum) control sensing the heater mounting flange/process temperature and 1 off terminal box cut-out. The sensors shall be connected to a suitable temperature control system to shut down the heater in the event the maximum temperature is exceeded. Over temperature control & cut-out must be manual reset either by: a.) auto-reset control & auto reset cut-out being, reset at control panel by key switch or special tool. b.) thermostat & cut-out being manual reset units, i.e. manual reset inside terminal box. Test Pressure 20 Bar g Working Pressure 13 Bar g Weight Approx 19 kgs each Ambient temperatures from -60°C up to +60°C - Note, if the ambient temperature is lower than -40°C, please contact sales
Condición: Nuevo (sin uso)

Encuentre piezas de recambio baratas para máquinas que utilizan los productos de Exheat. 

Nuestro equipo de expertos encontrará los mejores precios de venta de los productos de FP4-CA6-1-20-FS3-SO-RTD , 031781.05.02 (CEH1001/2) en Estados Unidos. 

Minimice sus gastos con los productos de alta calidad de Exheat. 

Sabemos que el tiempo es caro, así que vamos a encontrar los mejores precios para piezas de repuesto y componentes para Usted. 

No somos distribuidores oficiales de Exheat, pero lo estamos importando a precios razonables. 

Compre el producto original de Exheat - FP4-CA6-1-20-FS3-SO-RTD , 031781.05.02 (CEH1001/2) en Estados Unidos a precios razonables. 

No dude en convertirse en uno de nuestros clientes, no se arrepentirá! 

Envíenos su solicitud por correo electrónico o llene nuestro formulario de contacto. 

Nuestra empresa no es un distribuidor o representante oficial de esa marca.

Otros productos de Exheat

Onrion LLC

93 South Railroad Avenue, STE C Bergenfield, 07621-2352, New Jersey, USA

Teléfono:
+1 973 536 2331

Fax:
+1 973 302 5583