日本でChemitecの50-2

説明: Multiparamentric Controller

Techical specification: cod. 9740610010A Possibility of connecting up to 2 sensors. Color Graphic LCD 480(R.G.B.) (W) x 272(H) display for simultaneous display of: measure, temperature, state of the analogue and digital output (set point), alarms. Function keys for calibration and graphic display of measurement data. Internal data logger (32 Mbit flash – 128000 record) with ability to display graphical and tabular trends of measures with an indication of min, max and average of the period. 4 SET POINT (max 2 for each measures)with possibility of programming the range and the activation time. 1 Output for alarm : minimum, maximum delay set point, residence time, failure. 1 Output for wash: programming automatic electrode cleaning with interval and duration. 1 Digital input for activation and inhibition assays washing remotely. 1 Analogue input freely programmable 4 Analog outputs 0/4 to 20mA. Programmable limits within the measurement range of the sensor (with 2 equal measure that can be combined with the third output to generate an average of two measurements). Serial port RS485 with MODBUS RTU protocol ( other on request ). USB master module to download data on USB Flash Drive 2.0 ( Included ) Possibility of simulation outputs via keypad. Power supply 90 ÷ 240Vac 47 ÷ 63Hz ( 24Vac/dc on request ) ABS housing for wall mounting. Protection IP 66 Size 144x144x122 mm, 5 (D) Weight 1.0 Kg

条件：新品（未使用）