+1 973 536 2331

日本でExheatのFP4-CA6-0.25-12-FS3-SO-RTD , 031781.04.02 (CEH1001/1)

ユサキオートメーション合同会社 から日本でExheat FP4-CA6-0.25-12-FS3-SO-RTD , 031781.04.02 (CEH1001/1) の最良価格を御提供致します。

製品: FP4-CA6-0.25-12-FS3-SO-RTD , 031781.04.02 (CEH1001/1)
ブランド: Exheat
国名: 日本
Techical specification: Unit FP4-CA6-0.25-12-FS3-SO-RTD Customer Reference CEH1001/1 Item Number 031781.04.02 Capacity 0.25 kW – client specified Voltage 400V, 3Ph, 50/60Hz (4-W STAR) Fixing DN80 PN40 EN1092-1 Blind RF 316L Stainless Steel Flange Immersed Length 300mm of which 50mm is inactive Cable Entries Main Terminal box: 1 x M32 & 1 x M25 complete with temporary plugs (terminals suitable for 4mm² as standard, please advise if larger supply cable is to be used) HIHSPD140 Auxiliary Box : 2 x M20 complete with temporary plugs Protection ATEX / IECEx Certified Ex II 2 G D Ex d IIC T4 Gb Zone 1 & 2 Ex tb IIIC T135°C Db Zone 21 & 22 - LCIE 01 ATEX 6056X IECEx LCI 06 0006X Enclosure Powder Coated Mild Steel Weatherproof IP66 Elements 6 off 12 mm diameter Removable 304 St/Steel Cartridge Elements housed in a 16 mm Plain Surface 316L Stainless Steel Sheath with 316L St/Steel Thermostat pockets Stand Off 100mm Heater Bundle 72 mm diameter Watts Density 0,6W/cm² Controls (VAC) (S1) 1 off Simplex PT100 process temperature RTD to be terminated within separate HIHSPD140 316L Stainless Steel Ex’d terminal box Max set point +65°C (S2) 1 off Simplex PT100 Over temperature Limit RTD to be terminated within separate HIHSPD140 316L Stainless Steel Ex’d terminal box Max set point +80°C (S3) 1 off Manual Reset Box Cut Out set at +80°C, located within the terminal box to prevent overheating !Each heater must be fitted with 1 off (minimum) control sensing the heater mounting flange/process temperature and 1 off terminal box cut-out. The sensors shall be connected to a suitable temperature control system to shut down the heater in the event the maximum temperature is exceeded. Over temperature control & cut-out must be manual reset either by: a.) auto-reset control & auto reset cut-out being, reset at control panel by key switch or special tool. b.) thermostat & cut-out being manual reset units, i.e. manual reset inside terminal box. Test Pressure 20 Bar g Working Pressure 13 Bar g Weight Approx 19 kgs each Ambient temperatures from -60°C up to +60°C - Note, if the ambient temperature is lower than -40°C, please contact sales
条件:新品(未使用)

当社は、コストの最小化と利益の最大化を目的とした数多くの活動に携わっています。そのうちの1つは、ユサキオートメーション合同会社によるExheat製品の提供です。

当社は、日本におけるExheat – FP4-CA6-0.25-12-FS3-SO-RTD , 031781.04.02 (CEH1001/1) を最良価格と最短納期でお客様に提供しております。

生産力向上のために、Exheat製品をお求め下さい。

ユサキオートメーション合同会社はスペアパーツを最良価格で提供するために尽力しております。

当社は正規代理店ではありませんが、日本でExheatの製品を最良価格で提供しております。

Exheat製品を最良価格でご提供致します。日本のFP4-CA6-0.25-12-FS3-SO-RTD , 031781.04.02 (CEH1001/1) -。数年間、私たちはお客様に製品を提供してきました。電子メールまたは、お問い合わせフォームからお問い合わせ下さい。
当社は、このブランドの公認卸売業者または代理店ではありません。

からの他の製品 Exheat

ユサキオートメーション合同会社

〒584-0023 大阪府富田林市若松町東2丁目2番16号
 

電話:
+81-721-26-8450

ファックス:
+81-721-26-7242

メール:
sales@yusaki.jp