製品: FP4-CS1-0.63-20-FS3-SO-RTD, 031781.01.02 (ZEH 1006)
国名: 日本
Techical specification: Unit FP4-CS1-0.63-20-FS3-SO-RTD
Customer Reference ZEH 1006
Item Number 031781.01.02
Capacity 0.63kW – client specified
Voltage 400V, 3Ph, 50/60Hz (4-W STAR)
Fixing DN80 PN40 EN1092-1 Blind RF 316L Stainless Steel Flange
Immersed Length 500mm of which 50mm is inactive
Cable Entries Main Terminal box: 1 x M32 & 1 x M25 complete with temporary plugs (terminals suitable for 4mm² as standard, please advise if larger supply cable is to be used)
HIHSPD140 Auxiliary Box : 2 x M20 complete with temporary plugs
Protection ATEX / IECEx Certified Ex II 2 G D Ex d IIC T4 Gb Zone 1 & 2 Ex tb IIIC T135°C Db Zone 21 & 22 - LCIE 01 ATEX 6056X IECEx LCI 06 0006X
Enclosure Powder Coated Mild Steel
Weatherproof IP66
Elements 1 off 2” diameter Removable Ceramic Core Element housed in a Plain Surface 316L Stainless Steel Sheath with 316L St/Steel Thermostat pockets
Stand Off 100mm
Heater Bundle 64mm diameter
Watts Density 0.9W/cm²
Controls (VAC) - (S1) 1 off Simplex PT100 process temperature RTD to be terminated within separate HIHSPD140 316L Stainless Steel Ex’d terminal box Max set point +65°C
(S2) 1 off Simplex PT100 Over temperature Limit RTD to be terminated within separate HIHSPD140 316L Stainless Steel Ex’d terminal box Max set point +80°C
(S3) 1 off Manual Reset Box Cut Out set at +80°C, located within the terminal box to prevent overheating
!Each heater must be fitted with 1 off (minimum) control sensing the heater mounting flange/process temperature and 1 off terminal box cut-out. The sensors shall be connected to a suitable temperature control system to shut down the heater in the event the maximum temperature is exceeded.
Over temperature control & cut-out must be manual reset either by:
a.) auto-reset control & auto reset cut-out being, reset at control panel by key switch or special tool.
b.) thermostat & cut-out being manual reset units, i.e. manual reset inside terminal box.
Test Pressure 20 Bar g
Working Pressure 13 Bar g
Weight Approx 18kgs each
Ambient temperatures from -60°C up to +60°C - Note, if the ambient temperature is lower than -40°C, please contact sales
条件：新品（未使用）
機器や機械を修理するために必要なExheatの製品をご提供致します。
Exheatが製造する商品FP4-CS1-0.63-20-FS3-SO-RTD, 031781.01.02 (ZEH 1006)の価格と納期については、担当者にお問い合わせください。
Exheatの高品質な製品を使用することで、コストを最小限に抑えられます。
当社は日本において、お客様のニーズを十分に理解しお手伝い致します。
日本のExheatの正規代理店ではありませんが、最良価格で提供しております。
日本のExheat - FP4-CS1-0.63-20-FS3-SO-RTD, 031781.01.02 (ZEH 1006)の見積もり依頼については、お問い合わせください。
数年間、私たちはお客様に製品を提供してきました。電子メールまたは、お問い合わせフォームからお問い合わせ下さい。