製品: TMD1200
国名: 日本
説明: Original Spare Part
Techical specification: (Thermo Scientific Tramp Metal Detector, Ramsey Oretronic III
Model TMD1200
To protect conveyors and crushing machines in general.
The TMD detects with high reliability the presence of all types of magnetic, amagnetic, ferrous and non-ferrous tramp metals and scraps
(i.e. bucket teeth, manganese steel montles, etc.) found in bulk material travelling on belt conveyors.
Sensitivity (minimum size) on Thermo Ramsey approved installations: iron sphere, 25 mm diameter.
For metals with magnetic and conductive characteristics different by iron (i.e. AISI 301 and AISI 310) sensitivity (minimum size) can be higher or
lower (depending by tramp characteristics) and will be tested only during start up.
Sensitivity depends by location and ambient conditions.
System for belt width: 1200 mm.
System composed by:
- reinforced fiberglass supports;
- generator coil sealed into polypropylene, IP56 protection degree (NEMA 4);
- receiver coil sealed into polypropylene, IP56 protection degree (NEMA 4);
- junction box, IP55 protection degree;
- microprocessor control unit, Model 30-200.
Maximum distance between coils and control unit: 15 m, when using the JB descript above.
Control unit's main characteristics:
- field mount plastic housing, reinforced with fiberglass, IP66 protection degree (NEMA 4X);
- power supply 110/220 Vac, 50/60 Hz, 30 VA;
- n.1 alarm output;
- n.1 time delay output (front panel selectable time delay 0,1÷9,9 sec);
n.1 serial output RS485.
Working temperature:
- supports: -20° ÷ +80°C;
- coils: -20° ÷ +60° C;
- control unit: -40° ÷ +50° C.)
条件：新品（未使用）
製品の購入をお考えの方は、ユサキオートメーション合同会社からRamseyの製品を購入することができます。
当社は、日本におけるRamsey – TMD1200を最良価格と最短納期でお客様に提供しております。
当社のサービスによって、Ramseyの製品を日本で最良価格で提供させて頂きます。
当社は最良価格と最短納期で製品を提供致します。
当社は正規代理店ではありませんが、日本でRamseyの製品を最良価格で提供しております。
Ramseyのスペア部品を最良価格でご提供致します。 日本のTMD1200-Original Spare Part。私たちは、世界中にお客様がいることからもわかるように、多くのお客様の信頼を得ている会社です。電子メールまたは、お問い合わせフォームからお問い合わせ下さい。