日本でSanxingのFD3-24-A3-135-495-CN

CB-1A-220 transformer

Sanxing

FD24-A1-385.580-C33 + CB1A-230 +HF

Sanxing

CB-1A-230-FD-24-A1-385.580-C33 Original Spare Part

Sanxing

CB-2A-230 control box

Sanxing

CB-1A-230

Sanxing

FD-24-A1-385.580-C33 Motor

Sanxing

FD-24-A1-390 motor

Sanxing

FD5-24-C23 A3-205-305-24VDC 200N/PUSH 25MM / S SX 200500022311F Original Spare Part

Sanxing

Scissor Lifter with Installation Max. Vehicle Gross Weight: 12,000 lbs. (5443 kg)max Wheelbase : General service (surface/flush) 184”/180" (4673/4572 mm);Runway Width: 24” (609 mm);Lowered Height: 10” (254 mm);Max. Lifting Height: 71” (1803 mm);Motor: 208-230 VAC, 60 Hz, 26A, 1 ph;Air: 90-150 psi;Speed: 55 seconds (raise), 25-50 seconds (descent);Scissor Lifts should be certified under the program conducted by Automotive Lift Institute (ALI) and ETL Testing Laboratories to comply with Safety Standard ANSI/ALI, ALCTV and Electrical Standard ANSI/UL 201

Sanxing

SX200404612012C control board or a Complete Control Box for CB-1A-230 actuator (recliner)

Sanxing

SXLA115 Linear Actuator Input voltage: 12V/24VDC Load Capacity: 6000N max Speed: 4~ 40mm/s Stroke: 50mm~ 900mm Minimum installation distance: stroke + 160mm Duty Cycle: 10% Limit Switches: Built-in, Factory Preset Operation Temperature: -20℃~ +40℃ Noise decibel: ≤48Db Protection Class: IP44

Sanxing

FD-24-A1-460.760-C33 Original Spare Part

Sanxing

HYI371 Electronic card

Sanxing

CB1A-230 + FD-24-A1-390 Motor

Sanxing

CB-3A-230 Original Spare Part

Sanxing

CB-1A-230 (+ Actuator) Original Spare Part

Sanxing

FD-24-A1-385.580-C33 (complete with actuator, electric trasformer, hand comander)

Sanxing

FD24-A1-460 LINEAR ACTUATOR MOTOR

Sanxing

FD-24-A1-390.590-C33 Motor

Sanxing

CB-1A-230

Sanxing